Technical data

Operation Manual Clean Marker Brush − Page 15
5.4 DEALING WITH SHORT-TERM STENCILS
5.4.1 Marking with short - term stencils
•placetheshort-termstencilwiththeblue/greensidefacingyouintothe
typewriter/matrixprinter(withoutribbon)
•typethedesiredletteringontotheblue/greenside
•removetheshort-termstencilandcutittothedesiredsize.
•removethewhiteprotectivepaper
•moistentheuppersideoftheshort-termstencilwithelectrolyte
•putthestencilintopositionontheworkpiece
•pressthetoolheadontothestencilsothatthewholesurfacecoversthe
stencilandmoveitaroundgently
•afterabout1.5to2seconds(dependsonthematerial)theprocess
shouldbefinished
•cleanthesurfacesothatnoelectrolyteremainsontheworkpiece
•neutralizethesurfaceusingaclothsoakedinNeutralytGN2
•conservetheletteringandthemetalsurfacewithKonservatGK2
5.5 CLOSING DOWN THE UNIT
• switchoffatthemainswitch(11)andremovethemainsplug(13)
• dismantlealltheaccessories
• cleanallparts
5.6 BLASTING WITH THE CLEAN MARKER BRUSH-T AND BRUSH-TP
5.6.1 For precision removal of slag and scale spots on welded
seams
Additionalusesare:roughening,cleaning,de-rusting,de-burring,
polishing,mattingandcompactingsmallareas,byusingsuitableblasting
agents,suchasglassparticles,specialalumina,siliconecarbide,walnut
and plastic granulate in the range of 1 − 300µ.
5.6.2 Equipping for blasting
The Clean Marker T4 is equipped with a pressurised container holding 0.8 l.
Thejetnozzleisactivatedbytheswitchonthehandle.Thedesiredworking
pressureissetbythepressurecontrollerandcanbereadonthepressure
gauge.Therearetwoboroncarbidenozzlesd=1.2and1.8mmtochoose
from.Toexchangethenozzle,simplyunscrewtheunionringonthenozzle
handlethenexchangetheboroncarbidenozzle.
5.6.3 Setting up the blasting unit
Connectingthetubingontheunit:
• connectblastingtube
6mmtubingforblastingagents(8)
4mmtubing,blue(9)
4mmtubing,black(10)
Screwtheblastingnozzletothetubingusingascrewcap.Using
compressedairtubeconnectthecompressortoconnection