Technical data

1 saFeTY reGUlaTiOns
1.1 CORRECT UTILIZATION
Theunitsareintendedforcleaningweldedseams,forremovingoxide
coatingonstainlesssteelweldedseams,foretchingconductivemetal
surfacesandforgalvanizingandblastingsmallareas.Thefunctionisonly
guaranteedwhenoriginalpartsareused.Anyotheroranyusebeyond
thosedeterminedisnotconsideredtobecorrect.
Themanufacturecannotbeheldresponsibleforanydamagesresulting
from such incorrect use.
Thefollowingarealsoconsideredtobepartofcorrectutilization:
•Compliancewithinstructionsonuse.
•Compliancewithinspectionandmaintenancerequirements.
•Useofprotectiveclothing,especiallyglovesandgoggles.
1.2 TIPS AND DEFINITIONS
Warning
A possibly dangerous situation which could lead to serious
injury or even death.
Warning
A possibly dangerous situation, which could lead to light
physical injury. This sign is also used as a warning for heavy
material damage.
Information
Concerning usage and other useful information.
Information
The arrow describes a following process occurring automati-
cally and / or the condition which should now be set.
1.3 OBLIGATIONS AND LIABILITY
1.3.1 Necessary qualications of operators
Operation,maintenanceandinspectionmayonlybecarriedoutbyautho-
risedandqualiedspecialists.Theminimumageoftheoperatoris18.
Authorisedspecialistsareunderstoodtobespecialiststrainedbytheuser,
themanufacturerortheservicepartner.
Theseoperatorsmustbe:
• trainedintheuseoftheunit
• conversantwiththeinstructionsforuse
• conversantwiththesafetyequipmentoftheunit
• conversantwiththerelevantregulations,(especiallywithaccident
preventionregulations)
• authorisedtousethenecessarychemicals
Operation Manual Clean Marker Brush − Page 5