Technical data

generel data Brush-E Brush-S Brush-P Brush-T Brush-TP
dimensions
WxHxD[mm]
400 x 170 x 370 400 x 170 x 370 520 x 170 x 350 520 x 170 x 350 590 x 170 x 350
weight,ca.[kg] 12,8 12,8 14,5 14,5 15,5
serviceoutput 500 VA, IP 23 500 VA, IP 23 500 VA, IP 23 500 VA, IP 23 500 VA, IP 23
2.2 CONFORMITY
Theunitfullsthefollowingregulationsandstandards:
• EMV-Regulations2004/108/EG
• LowVoltageRegulations2006/95/EG
TheCE-labelisonthefrontoftheunit.
Thetypeplatewiththespecialunitnumberisattachedtotherear.
Further information
•Shouldskinorclothescomeintocontactwithchemicals,theyshouldbe
washed immediately with plenty of water.
•Donoteatordrinkattheworkplace.
•Alwayswashyourhandsbeforetakingabreak.
•Keeptheequipmentandchemicalsawayfromchildren.
1.3.7 Maintenance and servicing, repairing faults
Theprescribedmaintenanceworkandinspectionsaretobecarriedout
onschedule.Beforebeginningmaintenancework,inspectionorrepairs,
switchtheunitoffandsecureby„pullingtheplug“.
1.3.8 Constructional changes on unit
Withoutthepriorconsentofthemanufacturer,noalterations,additionsor
removalsofanysortmaybemadeontheunit.Onlyspareorreplacement
partsoriginatingfromthemanufacturerorhisauthoriseddealermaybe
used.
1.3.9 Emission
Electrolytemayvaporiseduringetchingandcleaning.Thesevapours
shouldnotbeinhaled.Providefreshaircirculationinyourplaceofwork.
2 inTrOdUCTiOn
2.1 TECHNICAL DATA
Operation Manual Clean Marker Brush − Page 7