Specifications

Mnl50005 (02-03) 5
OPERATION
ATTENTION: If using powdered cleaning
chemicals, mix prior to adding to solution tank.
NOTE: Prespraying carpet prior to cleaning will
enhance the overall cleaning results.
6. Plug machine’s power cord into grounded wall
outlet. (Figure 3).
FOR SAFETY: Do not operate machine unless
cord is properly grounded.
FOR SAFETY: Do not operate machine with the
use of an extension cord.
7. Secure recovery tank lid in place.
MACHINE OPERATION - WAND
FOR SAFETY: Do not operate machine unless
operator manual is read and understood.
PRE-OPERATION
1. Vacuum carpet and remove other debris with
standard vacuum.
2. Inspect power cord for damage.
3. Attach optional solution hose to quick disconnect
at the back of the machine. Disconnect vacuum
hose from right side of recovery tank and attach
optional vacuum hose in its place (Figure 4).
CLEANING CARPETS WITH WAND
1. Turn on the vacuum switch. Next, activate the
pump by turning on the “Continuous Spray”
switch (Figure 5).
Warning: Do not activate power head
switch when using a wand or accessory tool.
2. Take carpet cleaning wand in hand and squeeze
valve trigger while moving the tool in short
forward and backward strokes (Figure 6).
WHILE OPERATING WITH A WAND
1. Overlap each path by 50 mm (2 in).
Warning: Flammable materials or reactive
metals can cause an explosion or fire. Do not
pick up.
2. Periodically check for excessive foam buildup in
recovery tank. Use a recommended foam control
solution to prevent vacuum motor damage.
ATTENTION: Excessive foam buildup will not
activate the float shut-off screen.
3. Empty recovery tank every time water is added to
solution tank.
GROUNDED OUTLET
(3 hole)
GROUNDING
PIN
Fig. 3
Fig. 4
Fig. 5
Fig. 6