MSDS

Material Safety Data Sheet U. S. Department of Labor
May be used to comply with Occupational Safety and Health Administration
OSHA’s Hazard Communication Standard, (Non-Mandatory Form)
29 CFR 1910.1200. Standard must be Form Approved
consulted for specific requirements. OMB No. 1218-0072
IDENTITY
(As Used on Label and List)
CLEAN-N-DIP
Note: Blank
spaces are not permitted. If any item is not applicable, or no
information is available, the space must be marked to indicate that.
Section I
Manufacturer’s Name Manufacturer’s Code: 654
Sunnyside Corporation
Emergency Telephone Number
Chem Trec [phone]
Address (Number, Street, City, and ZIP Code)
225 Carpenter Avenue
Wheeling, IL 60090
Telephone Number for Information [phone]
Date Prepared 07/22/09
Signature of Preparer (optional)
Section II-Hazardous Ingredients/Identity Information
Hazardous Components ( Specific Chemical Identity; Common Name(s)) OSHA PEL ACGIH TLV Other Limits % (optional)
Benzyl Alcohol (100-51-6) Not Established 15-35%
Non-Hazardous Components N/A 60-80%
Section III- Physical/Chemical Characteristics
Boiling Point 100
0
C, 212
0
F Specific Gravity (H
2
0=1) 1.03
Vapor Pressure (mm Hg.) 13mm Hg at 25
0
C Melting Point N/A
Vapor Density (AIR =1) 8.6-8.7
Evaporation Rate (Butyl Acetate=1) <1.
Solubility in Water Considerable
Appearance and Odor Milky white, faint aromatic odor
Section IV- Fire and Explosion Hazard Data
Flash Point (Method Used) over 200
0
F
Flammable Limits
LEL N/A UEL N/A
Extinguishing Media Use C0
2 ,
foam, or dry chemical to extinguish fire.
Special Fire Fighting Procedures. Wear self-contained, positive pressure breathing apparatus and full firefighting protective clothing.
Unusual Fire and Explosion Hazards Decomposition under fire conditions will generate carbon monoxide and may generate other
toxic vapors.
N/A = Not Applicable