MSDS

Section V-Reactivity Data
Unstable
Conditions to Avoid Hot or cold Storage
Stability
Stable
X
Incompatibility (Materials to Avoid) Strong oxidizers, acids and alkalies
Hazardous Decomposition or Byproducts Thermal decomposition (combustion) will produce carbon monoxide and dioxide.
May Occur
Conditions to Avoid N/A
Hazardous
Polymerization
Will Not Occur
X
Section VI-Health Hazard Data
Route(s) of Entry: Inhalation? Skin? Ingestion?
Not Established Not Established Not Established
Health Hazards (Acute and Chronic) Direct contact or exposure to mists and vapor may cause slight to moderate eye irritation.
Prolonged or repeated exposure to product, vapors, or mists may cause slight skin irritation. Ingestion may cause moderate to
severe irritation of the gastrointestinal tract. Inhalation exposure to vapor or mists may cause moderate to severe irritation of the
respiratory tract.
Carcinogenicity: NTP? IARC monographs? OSHA Regulated?
Not listed Not listed Not regulated
Signs and Symptoms of Exposure: Eye Contact: a stinging sensation, excess blinking and tear production, redness and swelling
of the conjunctive. Skin Contact: redness and a burning sensation. Prolonged or widespread contact may result in the absorption of
potentially harmful amounts of material, with identical symptoms as ingestion. Ingestion: nausea, headache, dizziness, and
abdominal pain. Inhalation: headache, nausea, coughing, chest pain and vomiting.
Medical Conditions Generally Aggravated by Exposure None known
Emergency and First Aid Procedures Inhalation-remove victim to fresh air and seek medical attention if irritation persists.
Eyes-immediately flush exposed areas with large quantities of water for at least 15 minutes. Skin- immediately flush skin with
large amounts of water for at least 15 minutes while removing contaminated clothing. If irritation is evident or discoloration
persists, seek medical attention. Ingestion-do not induce vomiting unless directed by medical personnel. Drink large quantities of
water or milk. Seek medical attention.
Section VII-Precautions for Safe Handling and Use
Steps to Be Taken in Case Material is Released or Spilled Remove any source of ignition. Dike spill using soil, sand, or
absorbent. Soak up with suitable, non -combustible absorbent material, collect in suitable containers for disposal. Recover free
product, if possible. Prevent flow to sewer and public waters. For water spill, notify downstream users of possible contamination.
Waste Disposal Method Dispose of in accordance with all Local, State and Federal regulations.
Precautions to Be Taken in Handing and Storing Store at temperatures between 32
0
F-110
0
F,keep container tightly closed.
Empty containers should be thoroughly rinsed with water and disposed of according to local regulations.
Section VIII-Control Measures
Respiratory Protection (Specify Type) Use NIOSH approved chemical cartridge (organic vapor) respiratory equipment when
spraying material (full face respirator is recommended)
Local Exhaust Sufficient to maintain air concentration as required by OSHA Special N/A
Ventilation
Mechanical (General) Maintain adequate ventilation Other N/A
Protective Gloves Butyl rubber, Neoprene gloves Eye Protection Eye protection for application and removal such as
chemical splash goggles.
Other Protective Clothing or Equipment Impervious coveralls, apron, boots, as necessary to prevent skin contact.
Eye wash as needed.
N/A = Not applicable