User's Manual

Turn off and unplug the air
purifier.
Pull the rear handle to take
out thefilter cover.
Take out the
Multi-Integrated Filter.
Remove all the plastic
outer packages.
Install the Multi-Integrated
Filter.
Install the filter cover back,
plug in and press the power key.
Power Key
Press the power key, the machine will start the automatic mode.
Press it again, the machine will enter standby mode.
Power
Child Lock WiFi Indicator LED Light
Timer Fan Speed Sleep Mode
Filter Reset
Plug in your CleanForce air purifier and press the power key to turn the unit
on. Next the machine will start the automatic mode, and the LED lights on
top of the air purifier will display the air quality in three colors.
You can also use the Smart App to operate your air purifier.
Fan Speed Key
Touch the “Speed” key to enter the manual fan speed adjustment
mode. The fan speed switches between levels 1-3 and auto mode.
WiFi Networking
Long press the WiFi key to enter the network matching mode.
See the details on the next page: section “Smart App”.
Filter Reset Key
The indicator light for the Filter Reset key will flash at the end of
the filter service life, to remind the customer to replace the filter.
Once the filter has been replaced, long-press the Filter Reset key
for more than 5 seconds until the flashing light goes out.
Child Lock Key
Press the lock key to enter the lock mode, other keys are invalid in
this mode. Long-press the lock key (more than 3 seconds), to exit
the lock mode, this will allow other keys to then operate normally.
Timer Key
The user can set the running time of the air purifier, 1-12 hours
automatically on / off. Press the Timer key once to operate the
unit for 1 hour, press the Timer key twice to indicate that the unit
should operate for 2 hours, and soon. The maximum timing that
can be set is 12 hours. When the timer runs out, the air purifier
will shut down and enter standby mode.
Sleep Mode Key
Press the Sleep key, the light on the touch screen panel will be
dimmed, the air purifier will enter the mute mode operation, and
the LED display will go out. Press the sleep key again to cancel
the sleep mode.
Smart App
Scan the QR code to download and install the
ClearForce App, register an account.
Link the air purifier to the network for the first time
1 Open the CleanForce App, Click “+” botton on the right top, then click
your air purifier model, select your WiFi network and enter the password.
2 Long press “WiFi” button for 3s, the indicator light will rapidly.
3 select "Finish network configuration" on the app and click "next".
The smart app starts finding the device and adding it to the device list. After
successfully linked to the network, the WiFi indicator stops flashing and
stays ON.
If it fails to link to the network for a long time, the WiFi indicator goes out,
and the device stops pairing the network.
If you want to relink the network, press the WiFi key again to repeat the
network configuration operation.
After configuring the network and binding the device according to the
instructions, you can use the smart app to control your device.
Link To Smart Home Hub
This device support Alexa Echo, The method is as follows:
After linking the device to the WiFi network through CleanForce App, do
the following steps to connect the device to the smart speaker. Smart
speaker Apps may change the actions, these are for reference only.
Alexa Echo:
Completed the Alexa Echo’s configuration process first, then following the
next steps:
Open Alexa App, tap on "Skills" in the Alexa app menu, then search for
"Tuya Smart". Tap "Enable" to enable the Skill. Enter the CleanForce App
account and password, then tap “Link Now” to link your TuyaSmart account
to enable the Skill. Now you can start your smart home journey.