Operating instructions

Your CleanMax vacuum cleaner comes equipped with a Manual Reset Thermal Fuse Protector. This thermal
protector is designed to protect your vacuum cleaner from overheating due to a cutoff in airflow (i.e. clogged
hose, operating the vacuum without a bag). Should this situation occur, the thermal fuse protector will safely shut
off your vacuum cleaner to avoid any potential damage.
To reset the thermal fuse
1. Unplug the vacuum cleaner.
2. Check for problem (over-filled bag, clog in hose, clogged filters, etc.).
3. Correct problem.
4. Locate "tripped" fuse — the small red button located on the bottom of the back side of the main body (roughly
one inch to the right of the left wheel).
5. Using a pencil, paper clip, or other pointy object, push the reset button.
6. Plug vacuum cleaner in and begin using.
Please return to your CleanMax Retailer with any questions.
Thermal Fuse Protection
10
• Keep machine and all accessories clean and in good operating condition.
• Change vacuum bags and filters as recommended to maintain optimum cleaning efficiency.
• Always use genuine bags, filters and parts, as use of other products may result in poor cleaning or filtration
performance. CleanMax filtration products are designed for maximum performance.
•
Have machine checked periodically by the retailer where you purchased your CleanMax vacuum.
• Store machine carefully in dry area.
• For optimum cleaning performance and safety, follow your owner's manual.
For Best Performance