Operation Manual

3. Remove the ﬁ lter from the dust container.

4. Tap the ﬁ lter out over a dustbin. Clean the ﬁ lter using a soft brush if necessary. You

can also rinse the ﬁ lter under clear, lukewarm water. Attention: Do NOT use any

detergent! Allow the ﬁ lter to dry completely.

5. Insert the ﬁ lter back into the dust container:

6. Then place the dust container into the device and close the dust container cover. The

cover must be heard to engage in place.

Cleaning the Motor Filter

The motor ﬁ lter sits behind the dust container in the dust container

compartment.

1. Pull up the catch to open the dust container cover and ﬂ ip up the cover at the same

time.

2. Pull the dust container up out of the device by its handle.

3. Remove the ﬁ lter from the dust container compartment.

4. Tap the ﬁ lter out over a dustbin. Clean the ﬁ lter using a soft brush if necessary. You

can also rinse the ﬁ lter under clear, lukewarm water. Attention: Do NOT use any

detergent! Allow the ﬁ lter to dry completely.

5. Insert the ﬁ lter back into the dust container compartment.

6. Then place the dust container into the device and close the dust container cover. The

cover must be heard to engage in place.

Cleaning the HEPA Exhaust Air Filter

1. Pull the fastener of the exhaust air hatch (C) upwards and

detach the hatch from the device.

2. Remove the ﬁ lter from the exhaust air hatch.

3. Tap the ﬁ lter out over a dustbin. Clean the ﬁ lter using a soft

brush if necessary. You can also rinse the ﬁ lter under clear,

lukewarm water. Attention: Do NOT use any detergent! Allow

the ﬁ lter to dry completely.

4. Insert the ﬁ lter back into the exhaust air hatch.

5. Then place the exhaust air hatch into the device and close the

hatch. The hatch must be heard to engage in place.

Cleaning the Housing

If necessary, clean the housing using a slightly damp, soft cloth.