Operation Manual

31
Problem Potential cause/solution/tips
The suction power
is weak.
• Is the auxiliary air valve on the handle open? Close it.
• Is the dust bin too full? Empty the bin.
• Are the fi lters very dirty? Clean them.
• Is the nozzle, telescoping tube or suction hose plugged?
Turn the device off, pull the mains plug out of the socket and
remove the obstruction (also see chapter “Assembly”).
The device
emits dust when
vacuuming.
• Has the dust bin not been closed properly and/or is it not
(properly) inserted in the device? Correct this.
The power cord
cannot be wound
up completely.
• The cord has not been properly wound up in the device. Pull
it out somewhat and then push the button
for engaging
the cord winder again.
An unpleasant
odour develops
when vacuuming.
• Are you using the device for the fi rst time?
An odour often develops when using new devices for the
fi rst time. The odour should disappear once you have used
the device a few times.
Technical data
Model number: ZW-9021-E085
Product number: Z 08864
Voltage supply: 220 – 240 V~, 50 Hz
Output: 850 W
Safety class: II
Disposal
The packaging material can be recycled. Dispose of the packaging in an
environmentally-friendly manner and make it available to the collection service
for recyclable materials.
Dispose of the device in an environmental-friendly manner. The device does
not belong in the household waste. Dispose of it at a recycling centre for old
electrical and electronic devices.
For more information, please contact the administration in your community.
Customer service/importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany
Tel.: [phone] *)
*) Calls subject to a charge.
All rights reserved.