2050PSI Owner’s Manual CAUTION PRECAUCIÓN Before using this product, read this manual and follow all Safety Rules and Operating Instructions. Antes de utilizar el producto, lea este manual y siga todas las Reglas de Seguridad e Instrucciones de Uso. Questions? Help is just a moment away! Preguntas? La ayuda es justa un momento lejos! Call: Pressure Washer Helpline Llame: Línea Directa del Lavador a Presión - 1-800-743-4115 M-F 8-5 CT CleanShot™ is a trademark of Briggs & Stratton Power Products.
CleanShot™ 2050 PSI Pressure Washer SAVE THESE INSTRUCTIONS TABLE OF CONTENTS SAFETY RULES Safety Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Know Your Pressure Washer. . . . . . . . . . . . . . . . . . . . . . . . 5 Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11 Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CleanShot™ 2050 PSI Pressure Washer WARNING WARNING Running engine gives off carbon monoxide, an odorless, colorless, poison gas. Breathing carbon monoxide will cause nausea, fainting or death. Some chemicals or detergents may be harmful if inhaled or ingested, causing severe nausea, fainting or poisoning. Fuel and its vapors are extremely flammable and explosive. Fire or explosion can cause severe burns or death.
CleanShot™ 2050 PSI Pressure Washer WARNING CAUTION Excessively high or low operating speeds increase risk of injury and damage to pressure washer. Running engines produce heat.Temperature of muffler and nearby areas can reach or exceed 150°F (65°C). Severe burns can occur on contact. Combustible debris, such as leaves, grass, brush, etc. can catch fire. • DO NOT tamper with governed speed. • DO NOT operate pressure washer above rated pressure. CAUTION • DO NOT touch hot surfaces.
CleanShot™ 2050 PSI Pressure Washer KNOW YOUR PRESSURE WASHER Read this owner’s manual and safety rules before operating your pressure washer. Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.
CleanShot™ 2050 PSI Pressure Washer 5. 6. 7. ASSEMBLY IMPORTANT: Read entire owner’s manual before you attempt to assemble or operate your new pressure washer. Attach Handle Remove Pressure Washer From Carton 1. 2. 3. Connect high pressure hose to spray gun and pump. Connect water supply to pump. Attach nozzle extension to spray gun. 1. Remove the parts bag, accessories, and inserts included with pressure washer.
CleanShot™ 2050 PSI Pressure Washer Add Engine Oil and Fuel Figure 6 — Connect the Garden Hose to Water Inlet • Place pressure washer on a level surface. Inspect inlet screen, DO NOT use if damaged; clean if dirty. CAUTION Any attempt to crank or start the engine before it has been properly filled with the recommended oil will result in equipment failure. • Refer to engine manual for oil and fuel fill information.
CleanShot™ 2050 PSI Pressure Washer HOW TO USE YOUR PRESSURE WASHER How to Start Your Pressure Washer To start your pressure washer for the first time, follow these instructions step-by-step.This starting information also applies if you have let the pressure washer sit idle for at least a day. If you have any problems operating your pressure washer, please call the pressure washer helpline at 1-800-743-4115. 1.
CleanShot™ 2050 PSI Pressure Washer 8. How to Stop Your Pressure Washer Start engine according to instructions given in engine owner’s manual. Also see operating instructions tag located on the pressure washer. 1. 2. Let engine idle for two minutes. Turn engine off according to instructions given in engine owner’s manual. 3. Squeeze trigger on spray gun to relieve trapped pressure in hose to avoid injury. NOTE: A small amount of water will squirt out when pressure is released.
CleanShot™ 2050 PSI Pressure Washer 1. Applying Detergent with the Adjustable Nozzle Slide nozzle forward when you wish to adjust spray to low pressure mode (Figure 10). Slide nozzle backward to achieve high pressure. IMPORTANT: Use soaps designed specifically for pressure washers. Household detergents could damage the pump. Figure 10 — Adjusting Nozzle for Pressure CAUTION You must attach all hoses before you start the engine.
CleanShot™ 2050 PSI Pressure Washer Pressure Washer Rinsing 4. For Rinsing: 1. Slide the nozzle backward to high pressure, press the trigger and wait for the detergent to clear. Cleaning Detergent Siphoning Tube If you used the detergent siphoning tube, you must flush it with clean water before stopping the engine. 1. Place chemical injection siphon/filter in a bucket full of clean water. 2. Slide adjustable nozzle forward to low pressure position. 3. Flush for 1-2 minutes. 4. Shut off engine.
CleanShot™ 2050 PSI Pressure Washer SPECIFICATIONS PRESSURE WASHER MAINTENANCE Outlet Pressure . . . . . . . . . . . . . . . . . . . . . . . . . 2050 psi Flow Rate . . . . . . . . . . . . . . 1.9 gallons per minute (gpm) Detergent Use detergent approved for pressure washers Water Supply . . . . . . . . . . . . . . . . Not to Exceed 100°F Temperature Automatic Cool . . . . . . . . . . . . . Will cycle when water Down System reaches 125°-155°F Shipping Weight . . . . . . . . . . . . . . . . . . . . . . . .
CleanShot™ 2050 PSI Pressure Washer Check In-Line Filter Figure 14 — Removing and Cleaning Orifice Refer to Figure 13 and service the in-line filter if it becomes clogged, as follows: Figure 13 — Clean In-Line Filter Filter Screen Orifice Nozzle Extension O-ring 1. Detach spray gun and nozzle extension from high pressure hose. Detach nozzle extension from spray gun and remove o-ring and screen from nozzle extension.
CleanShot™ 2050 PSI Pressure Washer O–Ring Maintenance Purchase an O–Ring/Maintenance Kit, part number 191922GS by contacting the nearest authorized service center. It is not included with the pressure washer.This kit includes replacement o-rings, rubber washer and water inlet filter. Refer to the instruction sheet provided in the kit to service your unit’s o-rings.
CleanShot™ 2050 PSI Pressure Washer PREPARING THE UNIT FOR STORAGE NOTE: PumpSaver is available as an optional accessory. It is not included with the pressure washer. Contact the nearest authorized service center to purchase PumpSaver. To use PumpSaver, make sure the pressure washer is turned off and disconnected from supply water. Read and follow all instructions and warnings given on the PumpSaver container. Water should not remain in the unit for long periods of time.
CleanShot™ 2050 PSI Pressure Washer TROUBLESHOOTING Problem Cause Correction 1. Nozzle in low pressure mode. 1. Pull nozzle backward for high pressure mode. 2. Water inlet is blocked. 2. Clear inlet. 3. Inadequate water supply. 3. Provide adequate water flow. Inlet hose is kinked or leaking. 4. Straighten inlet hose, patch leak. Clogged inlet hose strainer. 5. Check and clean inlet hose strainer. Water supply is over 100°F. 6. Provide cooler water supply.
BRIGGS & STRATTON POWER PRODUCTS GROUP, LLC EQUIPMENT OWNER WARRANTY POLICY Effective September 1, 2004 replaces all undated Warranties and all Warranties dated before September 1, 2004 LIMITED WARRANTY Briggs & Stratton Power Products Group, LLC will repair or replace, free of charge, any part(s) of the equipment that is defective in material or workmanship or both. Transportation charges on parts submitted for repair or replacement under this warranty must be borne by purchaser.