Manual

Vitec Group Communications
AES-6 Digital Interface Instruction Manual
4-1
SPECIFICATIONS
AES-6 DIGITAL INTERFACE
0 dBu is referenced to 0.775 volts RMS
Audio
Audio Sample Rate 44.1 kHz - 96.0 kHz
CODEC Resolution 24 bits
Frequency Response 30Hz - 22 kHz ± 3dB
Signal to Noise Ratio < -65 dB (22 - 22kHz filter RMS)
Crosstalk (adjacent channel) < -75 dB @ 1kHz
Nominal Level 0 dBu
Input Impedance > 10 K
Output Impedance 150 R
Headroom +18 dBu
Distortion < 0.1% @ +18 dBu 300Hz - 10 kHz
< 0.5% @ +18 dBu 100 Hz - 20 kHz
Cable lengths
AES-6-CX to Panel Up to 500m using 75 Ohm coax cable
AES-6-RJ to Panel Up to 200m using 24AWG CAT5 cable
AES-6-RJ to AES-3 third party deviceUp to 200m using 24AWG CAT5 cable
Data Format
Audio data 24 bits
User Control data 8 bits
Physical Specifications
Operating Temperature Range 32
o
to 104
o
F (0
o
to +40
o
C)
Storage -22
o
to 158
o
F (-30
o
to +70
o
C)
Humidity 40 - 90% non-condensing
Notice About Specifications
While Clear-Com makes every attempt to maintain the accuracy of the
information contained in its product manuals, that information is
subject to change without notice. Performance specifications included
in this manual are design-center specifications and are included for
customer guidance and to facilitate system installation. Actual
operating performance may vary.
4