Manual

Beltpac Tone Settings:

You can change the Beltpac Tones from the Configure tab>Edit Beltpac Tones

box>Beltpac>Tones path as shown below:

Select the events for which you would like tones to sound in that Beltpac user’s headset. Each

Beltpac can have its own tone configuration.

• Battery tone – When enabled, low battery warning tones will be heard.

• Confirm tone – Not presently used; leave enabled.

• Error tone – When enabled, busy signals and connection rejection tones will be heard.

This should be left enabled for normal operation, especially when Beltpacs are sharing

frequencies (PTS mode).

• Alert tone – When enabled, an alert tone will be heard as confirmation that the alert was

received by the base.

• Call tone – When enabled, call tones will be heard when sent by other users.