Instruction manual

Clear-Com Communication Systems
CellCom V2.0 Instruction Manual
5-29
Figure 5-66: Lock Enable Menu
Selecting ON for the lock maintains whatever state the buttons are in
when they are locked. That state is maintained even when the
basestation is turned off and re-started. The buttons can be locked
either in the enabled or disabled position, in any desired combination.
Selecting OFF allows the buttons to be toggled on and off with a single
push.
REMOTE MICROPHONE KILL (“RMK”)
When RMK is selected the remote microphone kill menu will be
displayed.
Figure 5-67: Remote MIC Kill Menu
Kill Beltpack Microphones (“KILL(BP”)
Selecting this function will kill the microphones on all the wireless
beltpacks connected to the basestation. Beltpack users will have to
press a talk key again to re-enable the beltpack microphone.
Kill Party Line Microphones (“KILL(PL)”)
Selecting this function will kill the microphones on all the party line
stations connected to the basestation. As this operates by interrupting
the power to the party line stations it does not kill microphones on party
line stations that are externally powered .i.e not powered from the
CellCom basestation.
Kill All Microphones (“KILL(ALL)”)
Selecting this function will kill the microphones on all beltpacks and
party line stations attached to the CellCom basestation other than party
line stations that are externally powered.
Beltpack and party line users must press a talk button in order to
re-enable microphones afterwards.
Lock on Enable buttons is currently OFF
BACK
OFF
NO
Beltpack Remote MIC Kill
KILL(PL)
BACK
KILL(BP)
KILL(ALL)