Instruction Manual
CellCom/FreeSpeak Firmware Update Procedures
Rev: 6.05 VGC Part No.- 810372Z-MAN-6 Page 17 of 49
Kirk Module
RM5 Module
3.2.3 “Flash Downloader” for Antenna DECT updates
1) Install the DECT loader onto a PC with a serial port.
2) Connect the PC to the Antenna using the Beltpack registration cable.
3) Start up the Flashloader program, set as follows with the correct DECT
4) Power up the Antenna select start. The DECT should start updating; the
5) The ildr_425.hex can be found in the DECT images directory.
6)
application on your PC. Having previously saved the correct settings and the
antenna is connected and power up.