Owner manual

9.1 Pairing scenarios

There are various topologies that you can create. Some of these are illustrated below.

9.1.1 Digital Intercom

Remote and Speaker Stations have Digital Intercom 3-pin XLR connectors (female and male)

and can connect to Main Stations along with Beltpacks.

Note: A Remote or a Speaker Station draws current equivalent to three Beltpacks when the

loudspeaker is in use. If the Remote or Speaker Station is locally powered using a power

supply, it does not draw current from the digital intercom line.

1) Connect an XLR cable from a Main Station to the Remote or Speaker Station.

2) Power up the Main Station and verify that the Line 1 and Line 2 status LED are green

on Main Station.

3) On a Remote Station you can verify that the Line status LED is steady green.

HMS-

HRM-4X

Line 2

Line 1

HKB-2X

102

HelixNet Partyline User Guide