Owner manual

Tip: If the headset microphone is being used, hum or gently scratch the mic for a continuous signal
source to null on. If a good null is not attainable, switch the Long / Short DIP switch for the
channel to its opposite setting. Use the setting that produces the best audio quality.
To optimize audio quality, you may also want to adjust the Audio Settings on the
HMS-4X Main Station. For more information, see 4.2 Configuring the Audio settings.
13.1.4 Connecting to Encore remote stations
Connecting to an Encore remote station (for example, the RM-704) is similar to connecting to
an Encore Main Station (see 13.1.2 Quick reference: Connecting to Encore).
You will require a separate power supply, for example, the PS-702 (two channel) or PS-704
(four channel) power supply, to power the remote station which is unpowered and any
connected wired beltpacks.
13.2 Connecting HelixNet Partyline to RTS (Telex) two-wire
systems
13.2.1 About RTS two-wire systems
HelixNet Partyline is also designed for interoperability with RTS (Telex) TW (two-wire) analog
partyline systems from Telex.
RTS two-wire systems include fully programmable intercom (main) stations, remote speaker
stations, two-wire beltpacks, and two-wire power supplies.
122
HelixNet Partyline User Guide