Owner manual

To connect the HelixNet Main Station to a radio system using four-wire:
1) In the Audio Settings menu, select PGM/Audio In > GPO Trigger > Disable.
2) In the Audio Settings menu, select SA/Audio Out Mode > Channel Assign.
3) Assign the SA/Audio Out to a Channel.
4) In the Channel configuration select the Remote Station Program under the Program
Listen menu.
5) In the Channels menu, select Channel # > GPO on Talk > Relay 1.
6) Connect the audio and the Relay to the radio base station.
151
HelixNet Partyline User Guide