Owner manual

3) To select the IFB dim level:
a) From the third menu, select IFB Dim Level.
Note: The IFB Dim Level determines the volume level the Program Level is
reduced to when it is interrupted by the IFB.
b) From the fourth menu, select one of the following:
• IFB Disabled (default)
• - 6dB
• -12dB
• -18dB
• -24dB
• Full Cut
c) To confirm the selected setting, press the rotary control.
4) The GPO trigger activates a relay when receiving a call or activating a talk on a
partyline channel. You can enable or disable the GPO trigger.
a) In Menu mode, select Audio Settings and then Program Input.
b) From the third menu, select GPO Trigger.
c) From the fourth menu, select one of the following:
• Enabled (default)
• Disabled
d) To confirm the selected setting, press the rotary control.
Note: You can also configure the GPO trigger using Menu Mode > Modules
Settings.
5) To select the VOX:
e) From the third menu, select VOX.
f) From the fourth menu, select one of the following:
• Enabled
• Disabled (default)
g) To confirm the selected setting, press the rotary control.
6) To select the VOX Off Delay:
a) From the third menu, select VOX Off Delay.
72
HelixNet Partyline User Guide