Owner manual

b) From the fourth menus, select one of the following:
• .5 sec (default)
• 1 sec
• 2 sec
• 3 sec
• 4 sec
c) To confirm the selected setting, press the rotary control.
5.1.4 Audio settings for the SA (Stage Announce) output
To configure the settings for the SA output:
1) In Menu mode, select Audio Settings and then SA/Audio out.
2) To select the mode:
a) From the third menu, select Mode.
b) From the fourth menu, select one of the following:
• Channel Assigned (default)
• SA
c) To confirm the selected setting, press the rotary control.
3) To select the gain:
a) From the third menu, select Gain.
b) From the fourth menu, select one of the following:
• +12dB
• +6dB
• 0dB (default)
• -6dB
• -12dB
c) To confirm the selected setting, press the rotary control.
4) The Program Output setting enables the program to be delivered to this output if it is
assigned to a channel that also has a program feed assigned. To select the program
output:
a) From the third menu, select Program Output.
73
HelixNet Partyline User Guide