Owner manual

7.4.1 Assigning channels
You can assign any two available channels to the beltpack (including the same channel to
both keysets).
To assign a channel:
1) In Beltpack Settings select Left Channel or Right Channel.
2) Select one of the available channels (or none):
3) To confirm the selected setting, press the right-hand Call key.
7.4.2 Setting Talk key latching
To enable (or disable) Talk key latching:
1) In Beltpack Settings select Right Talk Latch or Left Talk Latch
2) Select one of the following:
• Latching (default)
• Non-Latching
Note: The setting applies to both channels on the beltpack.
3) To confirm the selected setting, press the right-hand Call key.
7.4.3 Setting the beltpack to vibrate when called
To enable (or disable) vibration when a Call signal is received:
1) In Beltpack Settings select Vibrate on Call.
2) Select one of the following:
• On
• Off (default)
3) To confirm the selected setting, press the right-hand Call key.
88
HelixNet Partyline User Guide