Owner's manual

4. To limit the peaks in audio on the headphones (or to disable headphone limiting):

a. Select Headphone Limit.

b. Select one of the following:

• Off

• +6dB

• 0dB

• - 6dB

Note:

The default is 0dB.

c. To enable (confirm) the selected setting, press the right-hand Call key [ ].

Note:

Limiting peaks in audio can help to prevent distortion on the headphone mic.

Note:

When Headphone Limit is set to anything except Off, a LIM indication will show up at the top right

of the display

5. Go back to the previous menu level by pressing the left-hand Call key [ ].

6. To set (or disable) sidetone tracking on the headset:

a. Select Sidetone Control.

b. Select one of the following:

• Tracking

• Non-Tracking

• Disabled

Note:

The default is Tracking.

c. To enable (confirm) the selected setting, press the right-hand Call key [ ].

7. Go back to the previous menu level by pressing the left-hand Call key [ ].

8. To set the type of mic on the headset:

a. Select HS Mic Type.

b. Select either of the following types of mic.

• Electret (-15 dB)

• Dynamic (0 dB)

• Dynamic (-10 dB)

Note:

The default is Dynamic (0 dB).

c. To enable (confirm) the selected setting, press the right-hand Call key [ ].

HelixNet Partyline User Guide