Owner's manual

6.3 Audio settings for the microphone

To configure the audio settings for the microphone:

4. In Menu mode [ ], select Audio Settings and then Microphone.

5. To select the Headroom:

c. From the third menu (third display screen), select Headroom.

d. From the fourth menu (fourth display screen), select one of the following:

• Normal

• High

Note:

The default is Normal.

6. To enable or disable the Contour Filter:

a. From the third menu (third display screen), select Contour Filter

b. From the fourth menu (fourth display screen), select one of the following:

• Enabled

• Disabled

Note:

The default is Enabled.

6.4 Configuring the Beltpack Settings

In Menu mode [ ] > Beltpack Settings, you can:

• Assign channels to the left and right beltpack keysets (set of controls).

• Enable (or disable) Talk key [ ] latching.

• Enable (or disable) beltpack vibration when a call signal is received.

Tip: For a quick reference to the keysets on the HBP-2X Beltpack, see

2.3.1 HBP-2X user controls (front and side view).

HelixNet Partyline User Guide