Owner's manual

6.4.2 Setting Talk key latching

To enable (or disable) Talk key [ ] latching:

1. In Beltpack Settings select Talk Latch.

2. Select one of the following:

• Latching

• Non-Latching

Note:

The default is Latching. The setting is global (it applies to both channels on the beltpack).

3. To enable (confirm) the selected setting, press the right-hand Call key [ ].

6.4.3 Setting the beltpack to vibrate when called

To enable (or disable) vibration when a Call signal is received:

1. In Beltpack Settings select Vibrate on Call.

2. Select one of the following:

• On

• Off

Note:

The default is Off.

3. To enable (confirm) the selected setting, press the right-hand Call key [ ].

6.5 Configuring the Display Settings

In Menu mode [ ] > Display Settings, you can:

• Set the brightness of the display screen.

• Set the brightness of the Talk [ ] and Call [ ] keys.

• Enable (or disable) the screensaver.

• Rotate the display.

Note:

By default, the Talk and Call keys are lit bright red when active (on) and dim red when inactive (off).

The default brightness setting for the display screen is medium.

HelixNet Partyline User Guide