Owner's manual

9.3.2 Quick reference: Two-wire connection to Tempest
Figure 19: Two-wire connection to Tempest
HMS-4
X Main Station 2W
Power
supply
Or
Encore Main Station
(MS-
70x)
Tempest Basestation
Standard mic cable
/ CAT-5
3-pin XLR connectors
Line must be powered (HMS
-4X 2
W
module appears as unpowered
beltpack
/ remote station to Tempest).
Configure the 2W module
Configure the port as Clear-Com
Enable auto-nulling
2W
Select Clear-Com as the intercom type
Select the connected channel (A or B
)
Select 2W mode
Enable auto
-nulling
Two-
wire connection to Tempest
94
HelixNet Partyline User Guide