User guide

Clear-Com®
MS-702 Two-Channel Main Station Instruction Manual
2-12
In the default position, the jumper plug covers pins 1 and 2, which causes
talk signal activation, rather than call signal activation, to interrupt the
program audio.
Figure 4: Changing Program Interrupt Options
JP5, for channel A
1
2
3
1
2
3
T
o interrupt program audio during talk signals,
place jumper plug over pins 1 and 2.
T
o interrupt program audio during call signals,
place jumper plug over pins 2 and 3.
JP6, for channel B
FOR EITHER CHANNEL:
Talk signals
interrupt
program audio
Call signals
interrupt
program audio