User guide

4-2 Clear-Com®
MS-702 Two-Channel Main Station Instruction Manual
Short Circuit Reset Time: < 15 s
Hum and Noise: < -80 dBv
Station Capacity
Capacity:
Maximum of 60 headset stations or 20 speaker stations, distributed over both channels
Rear Panel Connectors
Intercom: (6) XLR-3M (3 per channel)
Announce Out: (1) XLR-3M (audio)
Announce Relay: (1) 1/4 in. (0.64 cm) phone jack (relay)
Program: (1) XLR-3F
Hot Mic / IFB Interface: (1) 1/4 in. (0.64 cm) phone jack
AC Power: IEC 320 connector
Rear Panel Controls
(2) Termination On-Off switches
(8) Option switches
(1) Power switch
(1) Tone alert volume control
Front Panel Connectors
Panel Mic: (1) 1/4 in. (0.64 cm) panel mounting jack
Headset: (1) XLR-5F
Front Panel Controls & Indicators
(1) Panel / headset mic switch
(1) Announce button
(1) Party line link button
(2) Program ON-OFF-INTERRUPT switches
(3) Program level controls
(2) Listen controls
(2) Sidetone null controls
(2) Talk buttons
(2) Call buttons
(1) Tone alert button
(1) RMK button
(1) Speaker ON-OFF switch
(2) Short LEDs
Power Requirements
90 - 240 VAC, 50 - 60 Hz, 60 VA
Environmental
32 - 122
o
F (0 - 50
o
C)
Dimensions
19 in. W x 1.75 in. H x 6.5 in. D (483 mm x 44 mm x 165 mm)