Instruction manual

RM-702 TWO-CHANNEL REMOTE STATION
1-5
ANNOUNCE BUTTON
The announce button allows the operator to instantly use the microphone input
to directly talk to a system external to the intercom such as a paging
speaker/amplifier in another room. A dry set of relay contacts on the rear panel is
also available for activating external switching, as needed when the announce
button is pressed.
The button illuminates amber when pressed. Pressing the announce button
momentarily disables any active talks. Active talk circuits will be restored when
the button is released.
The talk-muting action can be defeated if desired by moving an internal jumper.
(See the section on internal options and adjustments.)