User's Manual

ManualsBrandsClear Touch Solutions ManualsComputers & AccessoriesKB200 Wireless Keyboard

2 3

 Read the user manual carefully and keep it for reverence.

 Use this product only as described in this user manual.

 If the instructions are not followed, the manufacturer may not be held responsible for damage that may

result from incorrect use of this product.

 Let repairs be done by a qualified mechanic. Never try to repair the product yourself.

 Do not place heavy objects on the keyboard cover.

 Keep the product away from water, oil, chemicals, and organic liquids.

 Clean the product by lightly rubbing it with a slightly damp cloth.

GUIDELINES FOR PROTECTION OF THE ENVIRONMENT

(WEEE, directive on waste of electrical and electronic equipment)

Your product is designed and manufactured with high quality materials and components

which can be recycled and reused. This appliance should n

ot be put into the domestic

garbage at the end of its durability, but must be offered at a central point for the recycling of

electric and electronic domestic appliances. This crossed-out wheelie bin symbol on the

appliance, instruction manual and packaging puts your attention to this important issue.

The materials used in this appliance can be recycled. By recycling used domestic appliances you

contribute an important push to the protection of our environment. Ask your local authorities for

information regarding the point of recollection.

attery/batteries disposal

Check the local regulations concerning the disposal and processing of batteries or contact the town hall or

your waste disposal company or with the store where you purchased the product.

The battery/batteries should never be disposed of in the normal garbage waste. Use a battery processing

authority in your area or community, when and where available.

Note:

- Only one device can be actively paired at one time.

- After pairing for the first time, your device will connect to the keyboard automatically when switching on

the keyboard.

- In case of connection failure, delete the pairing record from your device, and try the above pairing

procedures again.

ote:

Press Fn and Q (iOS), W (Android) or E (Windows) keys together to shift between Android, Windows or

iOS systems after connected successfully with a corresponding device. Otherwise the keyboard’s function

key will only be partial valid.For IOS system,the Language Exchange function does not work on version 9.0

and 9.0 above, you can press "Ctrl + Space" keys to exchange language.

1.When using Windows systems

2.When using Android system

Function key features may have variations depending on the operation system version and devices

Dual Mode Wireless Keyboard

For iOS / Android / Windows

User Manual

Keyboard size : 365x133x14mm

Working distance : ~10m

Lithium battery capacity : 1000mAh

Working voltage : 3.2~4.2V

Sleep time : 40 minutes

Press key current : ~1mA

Touch current: ~7mA

Standby current : <0.5mA

Sleep current : <50uA

Awaken way : click any key to awaken

Technical Specifications

Pairing Multi-Pairing Bluetooth Keyboard

1.Slide the power switch to “ ON ”, the blue indicator will be on, long press“ fn+BT1 ”

key 3 seconds,the bluetooth keyboard will enter pairing condition while the blue

indicator keep flashing at 0.25 second frequency.

2.Power on the device and select the setting icon on the screen,

click it to enter the system preferences list.

3.Click the Bluetooth icon to enter the bluetooth device searching condition.

4.In the bluetooth device searching list, you can find the “SmartTV Keyboard”,

click it to connect .

5.After the device connect the bluetooth keyboard successfully，

you can start to use the keyboard for typing freely.

6.Long press“ fn+BT2 ” key 3 seconds,the bluetooth keyboard will enter pairing condition

while the blue indicator keep flashing at 0.25 second frequency.

7.Follow steps 2-4 to pair additional Bluetooth devices.

In connected condition, if the blue indicator keep flashing at 0.5 second frequency,

please use the charging cable to charge the keyboard till the red indicator off.

Switching Between Devices

Backlight control

2.4G Mode Pairing

Light Analysis

Touchpad Analysis

Functional Key

Important guidelines

You will be able to switch between your paired devices by selecting the appropriate

assigned Bluetooth key（“ fn+BT1 ” or “ fn+BT2 ” or “ fn+2.4G ”）.

Multi-Pairing Bluetooth Keyboard can pair up to 2 different Bluetooth devices and 1 USB interface device.

1. Turn on the backlight:

After the keyboard is turned on, press“ ” key to turn on the backlight.

2. Backlight brightness control:

3. Switch the backlight color

Note: The time between switching devices will take approximately 2-4 seconds；

Press “ ”key once to turn on the first level of backlight by default, press second

time to turn on the second level of backlight, press the third time to turn on the third

level of backlight, and press the fourth time to turn off the backlight, so as to cycle.

After turning on the backlight, press “ ” key to switch the backlight color.

Power Management

Recharging the keyboard

If the keyboard is not in use, the keyboard will go into sleep mode after 40 minutes

of inactivity. Simply press any key to wake up the keyboard. It will take 2-3 seconds

to reconnect to the device selected.

Press“ fn+2.4G ”key, Switch to 2.4G mode, then press“ Esc + = ”key to enter to

Coding mode, Then plug in the receiver, The green light flashes for a few seconds

and then goes out to indicate successful code matching.

on Windows fn + on Windows

Fn + on iOS on iOS

fn+on Android

Volume down

Del

F10

F11

F12

Del

F10

F11

F12

Del

F10

F11

F12

Select all

Brightness up

Brightness down Brightness down

Copy

Paste

Cutting

Previous track

Play/pause

Next track

on Android

Previous track

Play/pause

Next track

Volume down

Volume up

Screen lock

Brightness up

Select all

Copy

Paste

Cutting

Volume up

Screen lock

Home Home Home

Return

Menu Menu Menu Menu

Return Return Return

Home Home Home

Volume down

Select all

Brightness up

Brightness down

Copy

Paste

Cutting

Previous track

Play/pause

Next track

Volume up

Screen lock

Key

Open active

window

Move Move the cursor

Finger slide

One finger

click

Two fingers

click

click touchpad

once

Click right key

once

click touchpad

once

Click right key

once

Touchpad function

Finger action

picture

Finger actionMouse function

backspace

BT1 BT2 2.4G

Power switch

OFF

Left mouse key Right mouse key

Indicator Analysis

. Charging indicator(red)

i.CapsLock indicator(green)

ii.Power indicator(green-2.4G mode)

iii.Low battery indicator(green-2.4G mode)

i.Power indicator(blue-bluetooth mode)

ii.Low battery indicator(blue-bluetooth mode)

iii.Pairing indicator(blue)

backspace

BT1 BT2 2.4G

2 3

Move cursor One finger Slide

One/Two finger(s) click once

or click twice

Two fingers slide

Slide to center from two sides

Three finger click

Three finger slid up

Click once or

Click twice

Scroll on parallel

or vertical

Zoom out

Open the cortana

Open background

window

Slide to two sides from center

Zoom in

Touchpad function

Finger action

picture

Finger action

Show Desktop Three fingers slide down

Three fingers slide to left

Three fingers slide to right

Backward

Forward

KB200

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

?Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could

void your authority to operate this equipment.

RF Exposure Information

The device has been evaluated to meet general RF exposure requirement. The device can be used in

portable exposure condition without restriction.