Quick Start Manual

CONNECT TO THE WIRELESS NETWORK:
•
PleaselocateyourModem’sdefaultwi-
Networknameandpasswordlocatedona
labelnearthebottomofthedevice
• Fromyourdevice,viewtheavailablenetworks
• SelecttheModem’swi-Network(locatedon
thelabel)
• Enterthewi-password,exactlyasitappears
onthelabel
• Yourdeviceshoulddisplayamessage
indicatingithasconnectedtoyourModem’s
wi-Network
Asanalternativetowi-fi,youcanusetheincluded
EthernetCabletoconnecttotheModem.
SET IT UP (continued)SET IT UP (continued)
Onceyour’vesetupyourModemandconnected
tothewi-fiNetwork,youshouldchangethe
Modem’swi-fiNetworkName(SSID)andthe
DefaultPasswordtosomethingeasytoremember.
• LogintoyourModem’sHomePage
byenteringhttp://192.168.15.1intoyour
webbrowser
• EnterthedefaultPassword(CLEAR123)
• FromtheMenu,select“Basic”then‘Wi-Fi”
• Enteryournewwi-fiNetworkNameand
Password(thewi-fi-Passwordmustbe
between8and63characters)
• Click“apply”tosavethechanges
• Useyourcomputer’swirelessConnection
Managertofindyourwi-fiNetworkName
andconnectusingthenewwi-fipassword
NOTE: Ifyouforgotyourwi-fiNetworkName
orPassword,youcanconnecttoyourModem
withtheEthernetCable.Login,usingthedefault
Modempassword,tovieworchangethewi-fi
NetworkNameorPassword.
SET IT UP (continued)
AstheModemissearching
fortheCLEAR4Gsignal,
fiveLEDlights,locatedon
thesideoftheModem,will
blinksequentiallyandthen
inunison.WhentheModem
isconnectedtotheCLEAR
4Gsignal,theLEDlightswill
stopblinkingandremainlit.
NOTE: ThenumberoflightsindicatestheCLEAR
4Gsignalstrength.Foroptimalsignalstrength,
youshouldtrydifferentlocationsfortheModem
toensureaminimumoftwolightsarelit.
IfatleasttwoLEDlightsarenotlit,trymovingthe
Modemtoanotherroom.
• MovejusttheModem(notyourcomputer)to
anotherroom,andwait15-20secondsafter
theLEDlightsaresolidwhiteforanaccurate
readingoftheCLEAR4Gsignal
• Tooptimizethesignalstrengthinthe
Modem’scurrentlocation,tryturningthe
Modembysmall1/4”increments
• OnceyoundthebestCLEAR4Gsignal,
you’rereadytoconnectyourdevices
SET IT UP
Aligntheslotsatthebottom
oftheCLEARModemwith
Wi-Fi(Modem)withtheslots
ontheModemFoot(Foot).
PushgentlyontheModem
tosnaptheFootintoplace.
ToremovetheFoot,pressboth
tabsoutward,atthesametime,
andtheFootwillreleasefrom
theslots.
FollowthediagramtopluginthePowerCord:
Afteryour’vepluggedtheModemintoapower
outlet,theModemwillautomaticallysearchfora
CLEAR4Gsignal.
LET’S GET STARTED
CLEAR Modem with Wi-Fi