basic V2 User manual Bedienungsanleitung Abb. ähnlich / Pic. similar Abb. ähnlich / Pic.
User manual / Bedienungsanleitung User manual ...................................................2 - 8 Bedienungsanleitung .....................................9 - 15 Dear Clearaudio customer, Congratulations on the purchase of your new basic V2 phonostage. Within that sleek aluminium casing (with silver or black anodized finish) lies an inner world of highly refined features.
User manual / Bedienungsanleitung Safety instructions 1. General information Check the device for visible damage before using it for the first time. If the device is damaged, it should not be connected to the mains. Also, never connect the device if it has been dropped or gotten wet, contact your dealer to have the device inspected. Never expose the device to rain or moisture. Never touch the power cord of the device with wet hands.
User manual / Bedienungsanleitung Phonostages provide a very high level of amplification, to address the fact that the electrical signal generated by a phono cartridge is extremely low. As a result, phonostages are extremely sensitive, which leads to the potential problem that high-frequency interference may also be amplified to a point at which it becomes noticeable.
User manual / Bedienungsanleitung 1. Package contents The Clearaudio basicV2 is delivered in a special designed packaging for this product. Ensure that the packaging has no external damage, such as shipping damage. Please retain the packaging, as only the original packaging provides the necessary protection and stability during any subsequent transportation. Please check the contents of you’re newly purchased phono preamplifier. 1 Pic. 1: Package contents 1. basic V2 hardwired power supply incl.
User manual / Bedienungsanleitung 2. Setup Select cartridge type operation mode: Set the switches on the bottom panel of the basic V2 chassis as follows: • MM operation: Buttons ‘gain’ not pressed in (load impedance = 47 kOhm) • MC operation: Buttons ‘gain’ pressed in (load impedance = 500 Ohm) Position MM = button not pressed, position MC = button pressed in.
User manual / Bedienungsanleitung 3. Troubleshooting If you have a problem with your basic V2, first check the possible causes to rule out incorrect operation. If the error persists, please contact your dealer! Never try to open the device and/ or repair it yourself, this w ill void the w arranty! Error Device does not w ork Cause Measure Is the power cord plugged in and the power Check the connection. switch turned on? Did you choose the right input? Check the connections of your hifi components.
User manual / Bedienungsanleitung 4. Technical Data Mode: Amplification: I nput load: RI AA accuracy: THD: MM / MC switchable (at bottom) // Subsonic filter switchable (at bottom) 20Hz (–18dB / Oct.; on each channel) + 46dB (MM mode) + 66dB (MC mode) 47kΩ / 270pF (MM mode) 500Ω / 270pF (MC mode ± 0.1dB < 0.002% (IEC A) Headroom: Max.
User manual / Bedienungsanleitung Sehr verehrte clearaudio – Kundin, sehr verehrter clearaudio – Kunde, Optisch inspiriert von der legendären absolute phono vereint auch die basic V2 audiophile Innovation mit der gewachsenen Analog-Kompetenz von clearaudio. Ihr Gehäuse wird aus hochwertigem Voll-Aluminium gefräst und ist im Originalfarbton des Materials oder schwarz eloxiert erhältlich.
User manual / Bedienungsanleitung Sicherheitshinw eise 1. Allgmeines Überprüfen Sie das Gerät vor der Inbetriebnahme auf vorhandene Schäden. Ist das Gerät beschädigt, sollten Sie es nicht am Stromnetz anschließen! Schließen Sie auch niemals das Gerät an, wenn es heruntergefallen oder nass geworden ist,. Kontaktieren Sie Ihren Händler, um das Gerät überprüfen zu lassen. Setzen Sie das Gerät niemals Regen oder Feuchtigkeit aus. Das Netzkabel des Gerätes niemals mit feuchten oder nassen Händen anfassen.
User manual / Bedienungsanleitung Phonovorverstärker sind Geräte mit einer hohen Signalverstärkung, da die Spannung die der Tonabnehmer des Plattenspielers liefert sehr niedrig ist (im Bereich von einigen mV). Aus diesem Grund werden auch hochfrequente Störsignale wahrnehmbar verstärkt. Eine vollständige Abblockung dieser Störsignale im Gerät würde die Audioeigenschaften verschlechtern. Das hat zur Folge, dass hochfrequente Störungen, zum Beispiel aus dem 230 V Netz bzw.
User manual / Bedienungsanleitung 1. Lieferumfang Die clearaudio basic V2 verlässt unsere Fertigung in einer besonders sicheren und speziell auf das Produkt abgestimmten Verpackung. Wir empfehlen Ihnen diese Originalverpackung für einen eventuellen Transport aufzuheben. Überzeugen Sie sich davon, dass keine äußeren Beschädigungen vorliegen, insbesondere keine Transportschäden. Bitte kontrollieren Sie den Lieferumfang I hrer neu erw orbenen basic V2 PhonoVorverstärker auf deren Vollständigkeit: 1 Abb.
User manual / Bedienungsanleitung 2. I nbetriebnahme Ausw ahl des Tonabnehmer-Betriebs ( MM/ MC) : Bitte benutzen Sie die Schalter „gain“ auf der Geräteunterseite. • MM-operation: Beide Schalter „gain“ nicht gedrückt ( I mpedanz = 47 kOhm) • MC-operation: Beide Schalter „gain“ gedrückt ( I mpedanz = 500 Ohm) Stellung MM = Taste nicht gedrückt, Stellung MC = Taste gedrückt MM-Einstellung MC-Einstellung Subsonic-Filter: Bitte benutzen Sie den Schalter „subsonic off/on“ auf der Geräteunterseite.
User manual / Bedienungsanleitung 3. Fehlerbehebung Sollten Sie ein Problem mit Ihrer basic V2 haben, überprüfen Sie zuerst mögliche Ursachen, um eine Fehlbedienung auszuschließen.
User manual / Bedienungsanleitung 4. Technische Daten Modus: MM / MC schaltbar (auf Unterseite) // Subsonic-Filter zuschaltbar (auf Unterseite) 20 Hz (–18 dB / Oct.
User manual / Bedienungsanleitung The full, extended warranty period for the basic V2 phono-preamlipfier is 3 years. To receive this full Clearaudio warranty, you must either complete and return the relevant section of the warranty registration card to Clearaudio, or register your product online at https:/ / clearaudio.de/ en/ service/ registration.php, within 14 days of purchase. Otherwise only the legal warranty of 1 years can be considered.
User manual / Bedienungsanleitung I TALI ANO GARANZI A L’apparecchio è coperto da una garanzia di buon funzionamento della durata di un anno, o del periodo previsto dalla legge, a partire dalla data di acquisto comprovata da un documento attestante il nominativo del Rivenditore e la data di vendita. La garanzia sarà prestata con la sostituzione o la riparazione gratuita delle parti difettose.
User manual / Bedienungsanleitung Page / Seite 18 © clearaudio electronic GmbH, 2022-12
User manual / Bedienungsanleitung Made in Germany Page / Seite 19
clearaudio electronic GmbH Spardorfer Straße 150 91054 Erlangen Germany Phone /Tel.: +49 9131 40300 100 Fax: + 49 9131 40300 119 www.clearaudio.de www.analogshop.de info@clearaudio.de Handmade in Germany Clearaudio Electronic accepts no liability for any misprints. Technical specifications are subject to change or improvement without prior notice. Product availability is as long as stock lasts.