Upgrade to Master Owner's manual

Upgrade
Innovation to Master Innovation
User manual
Page 11  clearaudio electronic GmbH 2014
10.)
Now take carefully the turntable unit out of the box 2 und set it onto the drive unit as shown
in the picture below (pic.12)
Please pay attention that the protection sheet between both units still remain to
avoid any damages!
Please pay attention that all center pins must be set very carefully into all threaded
holes.
Center pin to set
into threaded hole
Center pin to set
into threaded hole
Pic. 12: Set – up of the turntable unit
Pic 13.: Finished set – up of the turntable unit