Upgrade to Master Owner's manual

Upgrade
Innovation to Master Innovation
User manual
Page 6  clearaudio electronic GmbH 2014
Before you can start to reconstruct the Innovation turntable to the Master Innovation please
pay attention that all bases of the Innovation turntable have the height of 40 mm!
If one of your bases has not the height of 40 mm, please contact the dealer, where you
have purchased your Innovation turntable.
1.)
Take off the tonearm base and the blind screw on the other base at your Innovation
turntable (as shown in pic. 2).
2.)
In the next step take off carefully the drive platter of your Innovation .
Please keep all platters with you, as you need the platters again for the upgrade to the
Master Innovation .
Pic. 3: Taking off the drive platter
Pic. 2: Innovation turntable backside.