Instruction Manual

Master Innovation User manual (set-up)
Page 12  Clearaudio Electronic GmbH 2014
10)
Take the stainless steel sub-platter from carton 3 and remove the protective packaging.
Place the platter carefully onto the upper part of the bearing. Make sure that the protective
film is still fixed in place at this point.
Next, take the platter out of its box and set it carefully onto the bearing. The side with the
cut-out (for the record) should face up. Now you can carefully remove the protective film.
To avoid any damage to your bearing, the platter should be at room temperature before
beginning set-up (approx. 20° Celsius).
Please avoid any sideways force to avoid any damage to the ceramic bearing.
You can find various turntable adjustment accessories at www.clearaudio.de or
www.analogshop.de
Image 10a: Setting up the stainless steel platter
Image 10b: Seting up the platter
Image 11: Set-up finished