Instruction Manual

Master Innovation User manual (set-up)
Page 14  Clearaudio Electronic GmbH 2014
13)
The following final adjustment is very important.
Please ensure that your turntable rack is in a level position.
Please use the spirit level gauge provided to ensure that your Master Innovation turntable is
in a level position. You can adjust each of the turntable’s feet to level the turntable. You will
only get the best results with your Master Innovation turntable if it is level.
14)
Please connect the mains plug to your power supply.
15)
By pushing the sensor switch, marked with “33 1/3” on
the motor, the turntable starts to spin until 33 1/3 rpm
is reached.
After the initial set-up, we recommend a running in
period to ensure the perfect performance. To do this let
the turntable spin at 33 1/3 rpm for 15 to 30 minutes.
Image 13a: Alignment of the turntable
Image 14: Connection of power supply and motor
Image 13b: Adjustment of the turntable feet