User Manual

Performance S
E
User manual
Page 11  clearaudio electronic GmbH 2012
Use the enclosed headshell screws (2x M 2,5) to fix the
pick-up/cartridge to the headshell of the tonearm.
For a more comfortable adjustment, please take the delivered “Smart Stylus gauge” and
adjust the tracking force by using the gauge.
Please place the Smart Stylus gauge on the platter and put the cartridge on the fine line
which is marked with the recommend tracking force for your cartridge (e.g. clearaudio MM
cartridge 20 mN (2,0 gram)).
Picture 9: Mounting the cartridge
3
This position of the diamond correlates to a
tracking force of 20 mN (2,0g).
The tracking force is set, when the Smart
Stylus gauge is parallel to the surface of the
platter.
In this position the tracking force is to high.
You can correct the adjustment with your
tonearm weight.
In this position the tracking force is to low.
You can correct the adjustment with your
tonearm weight.
Picture 10: Use of the Smart Stylus gauge