User Manual

6
1. IR Receiver: Receives the signal from the remote
control.
2. Source Button: Hold down to switch your source to
HDMI, VGA, YPbPr or AV.
3. Snapshot Button: When previewing your signal, press
to take a still image of your video.
4. REC/STOP Button: Press this button to start/stop
recording. The button will flash while recording or saving.
5. USB Storage Port: Plug in your USB flash drive here.
6. MIC: Microphone input port.
7. Line Out: Audio output port.
8. Line In: Audio input port.
9. 5V/2A: Power jack.
10. HDMI IN: HDMI input port.
11. MMI IN: Multi-input port for non-HD (AV, VGA, or YPbPr)
video sources.
12. HDMI OUT: HDMI output port.
13. USB TO PC: Micro USB port for connection to PC for
recording or live streaming (PC only).