User's Manual

QUICK START – Setting Up The Device

1. Securely plug the power plug into a power outlet.

Important Note For Users Outside USA, Canada, and Mexico:

This device is ONLY compatible with standard North American

110V-120V voltage. Do NOT use with voltages over 110V-120V, as

this will permanently damage the device instantly!

2. Turn on the radio with the power switch on the right side.

3. The device will start up in either “radio” or “Bluetooth”

mode, whichever it was set on during last use. (NOTE: If you

have a 3.5mm aux-in cable plugged in, or have the USB

function turned on, these functions will take priority)

QUICK START – Listening To AM/FM Radio

1. If you previously had an aux-in/line-in cable connected,

make sure it is disconnected to use the radio.

2. If you previously had a USB drive connected, unplug it

and turn off the USB function in the rear of the radio.

3. Make sure the device is in “radio” mode by pressing the

“RADIO/BT” button until a light illuminates under the

“AM” or “FM button.

4. Switch between “AM” and “FM” by using the “AM” and

“FM” buttons.