User's Manual

5. Use the tuning knob to select your desired radio station.

6. Use the volume control knob to adjust the volume.

Note: To improve the reception of FM radio, simply adjust the

pigtail antenna in the back of the radio. To improve the reception

of AM radio, simply adjust the position of the entire radio.

QUICK START – Playing Music via Bluetooth

1. If you previously had an aux-in/line-in cable connected,

make sure it is disconnected to use Bluetooth.

2. If you previously had a USB drive connected, unplug it

and turn off the USB function in the rear of the radio.

3. Make sure the radio is in “Bluetooth” mode by pressing

the “RADIO/BT” button until a white/purple light

illuminates under the “RADIO/BT” button.

4. On your phone, tablet, or computer, search for the

Bluetooth device named “Vintage Radio VR47.” Connect

to this device.

5. Start playing music on your phone, tablet, or computer.

6. Use the volume control knob on the radio to adjust the

volume. (Note: You may also need to adjust the volume

on your phone or tablet.)