User guide

ManualsBrandsClearCube ManualsCommunicationClientCube 2 Mounting Bracket

Page 1 of 6 P/N G0200165 Rev B, 1.1.08.15.2014

ClearCube Technology, Inc. 3700 W Parmer Lane Austin, TX 78727 (512) 652-3500 www.clearcube.com

ClientCube 2 Mounting Bracket

Quick Start Guide

About the ClientCube 2 Mounting Bracket

Package

contents

The list below shows the contents of a mounting bracket package (images are not

to scale).

ClientCube 2 mounting bracket (× 1)

Keeper bracket (× 1)

Wood screws, 0.75-inch (× 7) for under-desk

mounting

Machine screw, 0.75-inch (× 1) for rear bracket

—

This Quick Start Guide (× 1)

Continued on next page

Summary of content (6 pages)

PAGE 1
ClientCube 2 Mounting Bracket Quick Start Guide About the ClientCube 2 Mounting Bracket Package contents The list below shows the contents of a mounting bracket package (images are not to scale). ClientCube 2 mounting bracket (× 1) Keeper bracket (× 1) Wood screws, 0.75-inch (× 7) for under-desk mounting Machine screw, 0.75-inch (× 1) for rear bracket — This Quick Start Guide (× 1) Continued on next page Page 1 of 6 ClearCube Technology, Inc.
PAGE 2
About the ClientCube 2 Mounting Bracket, Continued Assembled brackets The pictures below show assembled brackets (figure 1) and the mounting bracket installed below a desk with a ClientCube 2 (figure 2). Figure 1. Mounting bracket with keeper bracket latched in place Figure 2. ClientCube 2 mounted under a desk Page 2 of 6 ClearCube Technology, Inc. 3700 W Parmer Lane Austin, TX 78727 P/N G0200165 Rev B, 1.1.08.15.2014 (512) 652-3500 www.clearcube.
PAGE 3
Before You Begin Safety and precautions If any zero clients in a ClientCube 2 contain a smart card reader: Tools The list below shows tools needed for installation. Prevent ESD (electrostatic discharge) damage to smart card readers by always discharging your body and smart card before using a reader (for example, by touching a grounded, unpainted, metal object). ESD can vary depending on many environmental conditions, including clothing that users wear and how they handle smart cards.
PAGE 4
Installation This section shows how to install the mounting bracket and then install and secure a ClientCube 2. Installing the mounting bracket The steps below show how to install a mounting bracket under a desk. Step Action 1 Place the bracket on the underside of a desk. Ensure the front ears are set back a minimum of 1 ⅛- inches from the front of the desk. Mark the holes in the bracket and set it aside.
PAGE 5
Installation, Continued Mount the ClientCube 2 The steps below show how to mount a ClientCube 2. Step 1 Action The ClientCube 2 slides onto the mounting bracket’s square tube. Lift the ClientCube 2 and align the square hole on the back of the ClientCube 2 with the bracket’s square tube. Push the ClientCube 2 onto the tube until it stops. Rear of ClientCube 2 Figure 4.
PAGE 6
Installation, Continued Mount the ClientCube 2 (continued) Step 3 Action Slide the keeper bracket through cutouts on the front and fasten the latches. Figure 6. Slide the keeper bracket through cutouts and latch Additional Information and Support Contacting Support Web Uwww.clearcube.com/support/ Email Usupport@clearcube.com Toll-free (866) 652-3400 Direct (512) 652-3400 Page 6 of 6 ClearCube Technology, Inc. 3700 W Parmer Lane Austin, TX 78727 P/N G0200165 Rev B, 1.1.08.15.