User's Guide

Chapter 3. Network Considerations
26 PCoIP System User’s Guide
Figure 13. The Web interface Bandwidth page
3.6.1 Device Bandwidth Limit
This field defines the maximum bandwidth peak for the PCoIP system. The bandwidth setting
defines the bandwidth based on which side is sending data:
 On the host side: from the host to the client (e.g., graphics data)
 On the client side: from the client to the host (e.g., USB data)
The usable range of the device bandwidth is 1000 to 220,000 kbps.
The PCoIP processor only uses the required bandwidth up to the Device Bandwidth Limit
maximum. The processor dynamically adjusts the bandwidth in response to network congestion.