User's Guide

Chapter 6. Configuring Devices, Setting Peers, and Connecting
58 PCoIP System User’s Guide
To find a zero client IP address or MAC address:
Perform the following steps from Sentral (note that you must discover your zero client, optionally
install the Sentral Host Agent on your blade, and discover your host card before performing this
step for the first time; see Sentral Administrator’s Guide for more information):
1. From the Sentral menu, click Management > Thin Clients > PCoIP Thin Clients to display
the PCoIP Thin Clients Management screen, as shown in the following figure.
2. Record the zero client IP address (shown in the IP Address column) or the MAC address
(shown in the MAC Address column). This screen displays the following information about
each discovered zero client:
 IP address
 MAC address
 Zero client model number
 PCoIP mode (managed or unmanaged in the Sentral environment)
 Firmware version (of PCoIP firmware on the zero client)
 Thin client alias (a logical name for the zero client defined by the Sentral administrator)
Figure 25. IP and MAC address in Sentral PCoIP Thin Client Management screen
You can use this IP address to specify a peer device for your zero client or host, as described in
“Specifying a Device’s Peer” on page 68.