Products Owner's manual

R-Series Data Center Products User’s Guide Appendix C. Technical Support • 119
with the Fiber Transceiver. Refer to the Safety Guidelines on page 4 for more
information.
The maximum steady-state current draw of a single fully loaded chassis ranges
between 6 and 8 amps at 120 VAC, based on the level of user activity. The peak initial
current draw is 12 amps. If you are placing multiple chassis on a single power circuit,
make sure that the circuit can safely handle the combined currents of all the
equipment. Therefore, if you place two chassis on a single branch circuit, it must be
able to support a peak current of 25 amps at 120 VAC.