AccuMic II™ Microphone Installation & Operation Manual
ii Table of Contents Table of Contents 1 Introduction Introduction Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 About AccuMic II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Professional Services Group . . . . . . . . . . . . . . . . . . . . . . . . . .
2 Introduction Sales and Customer Service 3 Installation Installation Telephone: 1.800.945.7730 (USA) or 1.801.975.7200 Fax: 1.800.933.5107 (USA) or 1.801.977.0087 Connecting the AccuMic II E-mail: sales@clearone.com The AccuMic II easily connects to most video codecs at the line level audio input and output, as shown in the table below. ClearOne Communications EuMEA GmbH Leonhardstr.
Installation 5 Installation To connect to a video codec To connect a second AccuMic II 1. Connect the 10-pin end of the mini-DIN cable to the 10-pin connector on the AccuMic II (see Figure 3). You can connect an optional AccuMic II extension mic (kit part no. 910-156-117) 2. Connect the Speaker Ref In plug (white) to the video codec’s Audio Out jack. an AccuMic II and a 10' (3 meter) 8-pin to 8-pin mini-DIN cable. 3. Connect the Mic Out plug (red) to the video codec’s Audio In jack. 1.
6 Operation Operation Using the AccuMic II The AccuMic II is a plug-and-play microphone; the only function that is controlled Specifications Dimensions (L/W/H) Cable Noise Cancellation 8" x 6.5" x 1" 20.3 x 16.5 x 2.5 cm (1) 35' (10.7 m) 10-pin 6dB attenuation manually is Mute. Press the Mute button (on top of the mic pad) to mute the AccuMic II’s mics; press Mute again to unmute the mics.
8 Warranty Warranty End-User Warranty ClearOne Communications, Inc. (Manufacturer) warrants that this product is free of defects in both materials and workmanship. Should any part of this product be defective, the Manufacturer agrees, at its option, to: A. Repair or replace any defective part free of charge (except transportation charges) for a period of one year from the date of installation for the end-user, provided the owner returns the product to the Manufacturer at the address set forth below.
10 11 Compliance EN 55024: 1998 (Immunity) Information technology equipment – Immunity characteristics – Limits and methods of measurement.
ClearOne Communications Inc.
