User Manual

18 UNITE 200: User Guide
Options: Top, Center, Bottom
AF-Sense: Automatic focusing
sensitivity. Options: Low, Normal,
High
L/R Set: Options: STD, REV
6. NOISE REDUCTION
Select Noise Reduction in the main
menu and press the [HOME] button.
The NOISE REDUCTION menu
appears, as shown in the following
figure:
NR2D-Level: 2D noise reduction.
Options: Off, Auto, 1 - 5
NR3D-Level: 3D noise reduction.
Options: Off, 1 - 8
D-HotPixel: Dynamic bad points.
Options: Off, 1 – 5
7. SETUP
Select Setup in the main menu and
press the [HOME] button. The
SETUP menu appears, as shown in
the following figure:
Language: Menu language. Options:
EN, Chinese, and Russian
DVI Mode: Options: DVI, HDMI.
Protocol: Control protocol type.
Options: AUTO, VISCA, PELCO-D,
PELCO-P
V_Address: Protocol address. To be
decided according to the agreement,
SETUP
Language EN
DVI Mode DVI
Protocol VISCA
V_Address 1
V_AddrFix Off
Net Mode Serial
Baudrate 9600
Select Item
Change Value
[Menu] Back
NOISE REDUCTION
NR2D-Level 3
NR3D-Level 4
D-HotPixel Off
Select Item
Change Value
[Menu] Back