User Manual

21 UNITE 200: User Guide
new IP address, then Click “Apply”.
c. Restart camera.
4.2. Access camera’s web
Input http://192.168.100.88 into a
browser (Internet Explorer and
Firefox work best).
Note: If you have changed the
camera’s IP address, enter the new
address.
Note: To access the camera using
an IP address, you must be on the
same network as the camera.
A login window appears. Input the
user name: (default is “admin” and
password (default is “admin”, as
shown below (the login window may
not look exactly like this, depending
on your operating system and
browser) :
After login, the Web interface
appears, as shown below:
NOTE: If this is the first time using
the web interface, you must install
the VLC player software.
5. Access the camera
though WAN.
5.1. Dynamic DNS setup for
accessing the camera
Once you have set a domain name
to camera, and forwarded the traffic