User Manual

25 UNITE 200: User Guide
1) Brightness
Image brightness, 0 -14, slider
control, on the right shows the
corresponding numerical value. The
default value is 7.
2) Saturation
Saturation 0 - 14, slider control, on
the right shows the corresponding
numerical value. The default value is
4.
3) Contrast
Contrast 0 - 14, slider control, on the
right shows the corresponding
numerical value. The default value is
8.
4) Sharpness
Sharpness 0 - 15, slider control, on
the right shows the corresponding
numerical value. The default value is
3.
5) Hue
Hue 0 - 14, slider control, on the right
shows the corresponding numerical
value. The default value is 6.
6) Flip & Mirror
Select Flip to turn the image upside
down; select Mirror to flip the image
horizontally. The default value for
both is not selected.
7) Button
After adjusting any parameters, click
“Apply” to save the settings or click
“Cancel” to cancel the adjustment of
the parameters. Click “Default” to
revert to the default value.
6.4. Audio Setup, Click “Audio.”
1) Audio Type
Option: AAC.
2) Sample rate
Options: 44.1K and 48K.
3) Bit rate
Options: 96K, 128K, 256K.
4) Input Type
Option: line in only
5) Line in:
The gain of the Line in.
6) Reserved
7) Apply Button
Click "Apply" to save changes, or
click "Cancel" to discard the
changes.