User Manual

26 UNITE 200: User Guide
6.5. System setting, please click
“System”
1) Work Mode
Work Mode RTSP
2) Reboot
Click the "Reboot" button to restart
the system.
3) User and password
You can modify the password (letters
and numbers only)
4) Apply / Cancel
Modify password and click "Apply" to
change the password, or click
"Cancel" to cancel password
change.
6.6. Network Setting, Click
“Network.”
1) LAN Settings
The default IP address is
192.168.100.88. The MAC address
can be modified.
2) Port Settings
HTTP Port, Default port number: 80
RTSP Port, Supports the RTSP
protocol. Default port number: 554.
PTZ Port, Supports PTZ protocol.
Default port number: 5678.
3) Control Protocol Setting
Camera control communication
protocols include Visca address,
Pelco-D address, and Pelco-P
address.
4) RTMP Setting
When configuring the camera
stream, can set up two streams, in