User Manual

30 UNITE 200: User Guide
3. Check the server's IP address and subnet mask and
gateway address.
4. Check for MAC address conflicts.
5. Make sure the HTTP port isn’t occupied by other devices,
or that routing rules aren’t sending the traffic to a different
address or port.
IP address modified
incorrectly or forgot Web
interface password
You can recover access to the camera using the IR remote
control. Press "[*] + [#] + [Manual]" to restore the default values
(default IP: 192.168.100.88, default username: admin, default
password: admin).
The IR remote control
cannot control the camera
1. Change the remote control battery.
2. Check the camera working mode.
3. Check that the IR address of the Remote Commander is
set correctly.
Serial communication
cannot control the camera
1. Check the camera working mode.
2. Check that the control cable is connected correctly.