AP IR Remote Control Installation & Operation Manual ClearOne Communications, Inc.
ii Table of Contents Table of Contents Introduction 1 Introduction Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Professional Services Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Product Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Product Returns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 Introduction ClearOne Communications EuMEA GmbH Product Overview Leonhardstr. 16-18, D-90443 Nuremberg, Germany Tel: +49 911 955159-0 Fax: +49 911 955159-10 E-mail: global@clearone.com 3 Introduction AP IR receiver Product Registration Please register your AP IR Remote Control online in the Product section at MUTE IN USE READY www.clearone.com. When your product is properly registered, ClearOne Figure 2.
Introduction AP IR transmitter 5 Programmable Functions Programmable Functions The AP IR transmitter is used to program and operate the AP systems and GT1524. The buttons functions are described in Figure 4, below. Your AP IR Remote Control System is designed to operate right out of the box; however, it is easy to program should you require different specifications. Select from the options below and follow the instructions for the desired function you want to customize.
6 Programmable Functions 7 Programmable Functions To program telephone device type and ID Mute 1. Press and hold the Program button until the LEDs in the receiver flash. The default mute command on the AP IR Remote will mute all mic inputs on all 2. Press the On button. device types and all device IDs. To change this command and to add new commands, 3. Enter device type (0=device connected to, 2=AP10, 3=AP400, *=all telephone devices). you will need to program the mute function.
8 Programmable Functions To store a command to mute Output D on AP400 unit 0 in location 3, enter: PROGRAM 9 Programmable Functions Volume control examples To adjust volume of Output D on all units with a nominal level of 0 and store it in MUTE ON 3 3 0 Location Device Type Device ID 1 4 Channel location 0 (default), enter: 6 Input/Output PROGRAM 0 To store a command to mute all mics on AP400 unit 1 in location 2, enter: Location PROGRAM MUTE ON * * Device Type Device ID 1 6 4 C
10 Programmable Functions Hook Flash (AP400 and GT1524 Only) Hook flash sends a momentary interruption in the line seizure, allowing options such as 3-way calling, call waiting, and call hold. This feature is dependent on the services offered by your telephone company. 11 Using the AP IR Remote Using the AP IR Remote Once your AP IR Receiver is connected to your Audio Perfect system or GT1524 and the Ready LED is lit, you can start using your AP IR Remote.
12 Using the AP IR Remote To Access Features From a PBX • Press the Flash button. 13 Specifications Specifications Please consult your PBX owner’s manual for specific requirements of your individual Remote Control System Remote Transmitter Remote Receiver phone system. Range 25–40' (7.5–12 m) from transmitter to receiver Dimensions (LxWxH) 8" x 2.125" x 1.19" 20.3 cm x 5.4 cm x 3 cm Dimensions (LxWxH) 5" x 2.75" x 1" (12.7 cm x 7 cm x 2.
14 15 Compliance NO OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR USE, APPLIES TO THE PRODUCT. MANUFACTURER’S MAXIMUM LIABILITY HEREUNDER SHALL BE THE AMOUNT PAID BY THE END-USER FOR THE PRODUCT. No person or entity authorized to assume any obligation or other liability in connection with the products.
